Description
HONDA CRF 50 GRAPHICS: Printed using a high specification vinyl inkjet printer, using long-life inks and outdoor-use top quality vinyl. Simple peel and stick application.
- To suit the HONDA CRF 50, years 2004 to 2012.
- High resolution prints.
- Vibrant, long-lasting colours.
- Air release vinyl for easy fitting.
- Laminated with a clear protective over-laminate to protect the print from scratches.
***LAMINATED WITH A THIN OVER-LAMINATE – NOT THE THICK HEAVY DUTY LAMINATE NORMALLY USED ON MX BIKES***
FITTING INSTRUCTIONS for your Honda CRF 50 graphics:
As with fitting any sticker, it is important to start with a nice clean surface. Iso-propanol, carb cleaner or similar solvent is good for removing grease from the plastics. The vinyl has a low initial tack which becomes more sticky when you apply pressure and/or a little heat. DO NOT use water to apply these graphics, they need to be fitted dry.
During fitting, if you have air bubbles, just rub them with your thumb or a soft cloth, working out towards the edges. Air-release vinyl makes it very easy to push air bubbles out for a perfect finish.
After fitting, it is important to use a hair dryer to gently warm up the vinyl. Adding heat to the vinyl softens it up helps the adhesive bind firmly to the plastics. Check the edges the next day, and if any have lifted up, just apply a little more heat and press them back down.
When using a pressure-washer to clean the motorbike, keep the high pressure nozzle at least 2ft from the graphics.
